Integrated Partner

Design with MTC Solutions Beam Hangers

MTC Solutions manufactures the APEX concealed beam hanger for mass timber, integrated into SPEC Toolbox with the values of MTC's Canadian Beam Hanger Design Guide. Size and verify an APEX S, M, L or XL connector in the glulam beam-to-column or beam-to-beam connection you're designing, to CSA O86, with fire-resistance ratings to 2 hours. Every value comes from MTC Solutions' published design guide, not a generic catalogue number.

Explore The Integrations → Powered by SPEC Toolbox. Real MTC design-guide data on every hanger.
  • 15 calcs
    CLT tools available
  • 6,000 +
    Engineers using SPEC
  • 12 +
    EU CLT & fastener brands
  • 100 % free
    Browser-based · no download
Integrated product system available now in Canada

The MTC Solutions system, ready to design

Integrated product system available now in Canada, designed to CSA O86 from MTC's Canadian Beam Hanger Design Guide.

Spectoolbox

About MTC Solutions

MTC Solutions is a mass timber hardware specialist supplying structural connections across North America. Founded in 2011 as MyTiCon Timber Connectors, the company brought self-tapping structural wood screws to the emerging North American mass timber market, and has since supplied hardware to thousands of mass and heavy timber projects, by its own count. Its systems are tested in North America, in collaboration with North American universities.

The APEX system is MTC’s pre-engineered concealed beam hanger for glulam and mass timber: a pair of aluminium plates seated in routed housings in the beam and its support, fastened with MTC FTC self-tapping screws driven at 45 degrees to the shear plane. It comes in the 100 and 150 Series for single or double configurations, beam-to-column or beam-to-beam, with published design data for Canada and the US.

Frequently asked questions

Design With MTC Solutions

Is the MTC Solutions calculator free to use?
Yes. The MTC Solutions hanger calculator on SPEC Toolbox runs free in the browser. No download and no licence: sign up free and design and verify with real manufacturer data.
What standard are APEX hangers designed to?
In Canada, to CSA O86:24 in limit states design, using the factored resistances published in MTC's Beam Hanger Design Guide for Canada. [US] In the US, to the AWC NDS 2024 in allowable stress design, using the values of MTC's US Beam Hanger Design Guide, recognized under ICC-ES ESR-5466.
Which MTC Solutions products are integrated?
The APEX concealed beam hanger: APEX S and M (100 Series) and APEX L and XL (150 Series), single or double, visible or routed into either member, for beam-to-column and beam-to-beam connections. It is integrated for Canada; 1 product system in total. [US] It is integrated for Canada and the United States.
What does the calculator check?
The hanger's resistance against downward, upward, lateral and axial loads, including a combined force check; the minimum primary and secondary member sizes; and splitting of the connected members, with MTC FTC reinforcing screws designed where splitting needs to be addressed. The design of the timber members themselves stays with the engineer of record. [US] In the US, the capacities are allowable (ASD) values with the NDS load duration factor.
Can APEX connections be fire-rated?
Yes, for ratings of 45, 60, 90 and 120 minutes. Routed into the primary or secondary member, the connector is concealed within the timber, and the design guide sets the minimum primary and secondary member sizes for each rating, which the calculator applies for the rating you select. A visible mounting needs a fire protection strip in the gap between the beams.
FOR ENGINEERSStart designing now

Free, browser-based, no download. Design any certified connection into your real materials in seconds.

Start Designing For Free →
FOR SUPPLIERSBecome a partner

Get your products in front of every engineer specifying on the platform — at the point of design.

Get Your Products Specified →
Close Menu