Integrated Partner

Design with Anzor Timber Screws

Anzor supplies stainless timber fasteners and fittings for mass timber, integrated into SPEC Toolbox with manufacturer-published data on every screw. Size, verify and specify an Anzor connection into the real CLT, glulam or steel your project uses, verified to ETA and can design with AS 1720.1 and NZS AS 1720.1:2022. Every value comes from Anzor's published technical data, not a generic catalogue number. Anzor is 100% NZ-owned, supplying fasteners for over 30 years from 12 branches nationwide.

Explore The Integrations → Powered by SPEC Toolbox. Free, real certified data on every part.
  • 15 calcs
    CLT tools available
  • 6,000 +
    Engineers using SPEC
  • 12 +
    EU CLT & fastener brands
  • 100 % free
    Browser-based · no download
Integrated product systems available now in New Zealand, designed to ETA

Every Anzor system, ready to design.

Integrated product systems available now in New Zealand, designed to ETA

New Zealand
Anzor Quick Drill Screws
Screws

Screws

EN 1995-1-1 (Eurocode 5); AS1720; NZS AS 1720.1:2022 Calculator →
Spectoolbox

About Anzor

Anzor has New Zealand’s largest stock and widest range of stainless fasteners and fittings. Supplying fasteners for over 30 years, Anzor is 100% NZ-owned and operated. With 12 branches nationwide and backed by a huge distribution center, Anzor Quick Drill Screws for timber construction are ready to dispatch, so you can build without delays.

These timber construction screws have been extensively tested and are ETA-certified and fully compliant with the latest standards, available in 304 stainless steel, 316 stainless steel and Nano Galv, designed with star drive heads in both washer and countersunk styles, and ideal for both residential and commercial timber projects.

Frequently asked questions

Design With Anzor

Is the Anzor calculator free to use?
Yes. on Anzor calculator SPEC Toolbox runs free in the browser. No download, no license, no account needed to design and verify a connection.
What standards apply to Anzor Quick Drill Screws?
Anzor Quick Drill Screws are covered by ETA-12/0471. Anzor’s updated brochure confirms NZS AS 1720.1:2022 compliance for the 304 stainless steel, 316 stainless steel and Nano Galv ranges. NZS AS 1720.1:2022 is the New Zealand standard; AS 1720.1 applies in Australia.
Which Anzor products are integrated?
Screws are integrated for Australia & New Zealand. 1 product systems in total.
Can I design Anzor connections in CLT, glulam or LVL from any supplier?
Yes. The calculator lets you select the CLT, glulam or LVL you're specifying from any integrated supplier and verifies the connection against that material's real characteristic density.
Where does the capacity data come from?
Directly from Anzor's published ETA compliance data. Nothing is averaged or re-derived.
FOR ENGINEERSStart designing now

Free, browser-based, no download. Design any certified connection into your real materials in seconds.

Start Designing For Free →
FOR SUPPLIERSBecome a partner

Get your products in front of every engineer specifying on the platform — at the point of design.

Get Your Products Specified →
Close Menu